Tomahawk TPC80 Скачать руководство пользователя страница 3

Страница: 3 / 28

This manual provides information and procedures to safely operate and maintain this

model. For your own safety and protection from injury, carefully read, understand and

observe the safety instructions described in this manual.

Keep this manual or a copy of it with the machine. If you lose this manual or need an addi-

tional copy, please contact Tomahawk Power LLC or visit

www.tomahawk-power.com

This

machine is built with user safety in mind; however, it can present hazards if improperly

operated and serviced. Follow operating instructions carefully. If you have questions about

operating or servicing this equipment, please contact Tomahawk Power.

The information contained in this manual is based on machines in production at the time

of publication. Tomahawk Power reserves the right to change any portion of this informa-

tion without notice.

No part of this publication may be reproduced in any form or by any means, electronic or

mechanical, including photocopying, without express written permission from Tomahawk

Power.

Any type of reproduction or distribution not authorized by Tomahawk Power represents an

infringement of valid copyrights and will be prosecuted. We expressly reserve the right to

make technical modifications, even without due notice, which aim at improving our ma-

chines or their safety standards.

1. Safety Information

This manual contains DANGER, WARNING, CAUTION, and NOTE callouts which must be

followed to reduce the possibility of personal injury, damage to the equipment, or improp-

er service.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury

or death.

DANGER

indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

DANGER

WARNING

CAUTION

Содержание TPC80





























Результаты поиска

Содержание TPC80

Отзывы:

Похожие инструкции для TPC80

Бренды по названию

Популярные бренды

Tomahawk TPC80, Руководство по эксплуатации

Результаты поиска

Содержание TPC80

Отзывы:

Похожие инструкции для TPC80

Бренды по названию

Популярные бренды