Tomahawk TPC400Z, Руководство оператора

Страница: 26 / 35

Operator’s Manual
26
Wait until the engine stops before repeating the starting procedure.
NOTICEImproper use can damage the compression lever.
If the engine does not start, proceed as follows before attempting to start again:
1. Press the compression lever down fully and then pull it up.
2. Start the engine again.
4.2 Mechanical oil pressure control
It is necessary to reactivate the mechanical oil pressure control in the following cases:
•
After the initial filling - first filling - of the fuel tank or if the tank has run dry.
•
In the case of an automatic engine stop due to an inefficient engine oil supply.
•
After freeing the engine when in presence of extremely low temperatures.
1. Fill up fuel tank.
2. Check engine oil level.
3. To activate depress hand lever for approx. 5 seconds.
4. Hold down pin during approx. 5 seconds in the case of encapsulated engine versions.
5. Simultaneously actuate hand lever a few times in the case of engines equipped with fuel
pumps.
6. Complete engine. Check to see that encapsulating elements seal correctly.
Check oil level every 8 to 15 operating hours in spite of the mechanical oil pressure
control.