Tomahawk TPC400Z, Руководство оператора

Страница: 25 / 35

Operator’s Manual
25
Operation
4. Operation
4.1 Starting
4.1.1 Conditions:
Oil:
Check oil level with oil dipstick, if necessary top up with Shell Omala Oil 100 through oil
filler neck.
Fuel:
When pouring diesel fuel into the filler neck (15), maintain absolute cleanliness. Impurities
in the fuel can cause breakdowns in the injection system and premature clogging of the
fuel filter.
Air filter:
Clean air filter dry, dusty conditions.
4.1.2 Once these points have been observed, you can start the engine as follows:
1. Turn the throttle control lever (3) clockwise into full load position.
2. Push decompression lever upwards.
3. Pull the crank cable outwards from the casing.
4. After having engaged the automatic decompression system to the stop position, the
engine will require five full turns of the crank until the engine regains its compression and
fires up.
5. Stand beside the engine (feet slightly apart), viewing in the forward direction.
6. Place one hand on the machine an crank with the other hand.
7. Keeps a firm hold of the crank while cranking in order to avoid the risk of sudden slippage.
8. Turn crank slowly at first until crank engages and then increase cranking speed.
9. As soon as the engine is running, remove crank (24).
10. Turn throttle control lever (8) into idling position, allow engine to warm up for 7 minutes at
idling speed.
Note: Do not activate automatic decompression lever while the engine is running.