tomado TVC2001B, Инструкция по эксплуатации

Страница: 17 / 36

EN - 17
CLEANING OR REPLACING THE MOTOR FILTER
The motor filter ensures no large dust particles can enter the engine. Clean the motor filter every six months.
1. Grab the handle of the dust collector and press the button [4] to release the dust collector. Lift the
dust collector and set it aside.
2. Take out the motor filter [21] with your thumb and index finger from the air inlet of the vacuum
cleaner.
3. Clean the motor filter [21] under lukewarm water and let it air dry completely. Do not use any
cleaning agents or brushes.
4. Place the dry motor filter back in the air inlet.
5. Place the dust collector back on the vacuum cleaner. You will hear a click when it is placed
correctly.
CLEANING THE CYCLONE SYSTEM AND THE DUST COLLECTOR
When the dust collector and the cyclone system are very dirty, they can be cleaned under lukewarm water.
1. Follow step 1, 2 and 3 of chapter CLEANING THE CYCLONE FILTER.
2. Lift the cyclone system [22] out of the dust collector.
3. The dust collector [2] and the cyclone system [22] can be cleaned under lukewarm water. Use a
soft brush or sponge to remove tough dirt.
4. Dry the parts thoroughly and let them air dry at least for 24 hours to ensure there is no more moist
in the inside of the parts. Attention: using the vacuum cleaner with damp parts can cause damage
to the engine.
5. Place the cyclone system back into the dust collector.
6. Press the cyclone filter back in the lid of the dust collector.
7. Close the lid of the dust collector. You will hear a click when it is closed correctly.
8. Place the dust collector back on the vacuum cleaner. You will hear a click when it is placed correctly.
CLEANING OR REPLACING THE HEPA FILTER
The HEPA filter cleans the air one last time before it leaves the vacuum cleaner. Clean the HEPA
filter at least once per six months or when it is very dirty. Replace a damaged HEPA filter with a new
original HEPA filter.
• Open the grid [23] that covers the HEPA filter by pushing the clip.
• Pull the clip back and take out the HEPA filter [24].
• Rinse the HEPA filter under lukewarm water and let it air dry completely. Do not use any cleaning
agents or brushes.
• Put the HEPA filter back into place, when dry, or replace it by a new one.
• Replace the grid. Make sure that the grid is properly placed.
A ttention
• Use the vacuum cleaner only when the filters and a dust bag are in place. If not, it can lead to loss
of suction power or damage to the motor.
• Unplug the vacuum cleaner before cleaning or replacing the filters.
• Torn filters or filters that do not fit properly can cause damage to the engine. Replace a damaged
filter by an original new one.
• Do not clean the filters in a dishwasher.
• Do not use a hair dryer to dry the filters.
21
24
23
22 2