PRODUCT DESCRIPTION
EN - 15
1. Connection for hose
2. Dust collector
3. Handle
4. Button to release the dust collector
5. On/off button
6. HEPA filter behind the grid
7. Cord storage system
8. Button for automatic cord rewinding
9. Hose
10. Additional suction power control
11. Click system for (dis)connecting the hose handle to tube
12. Slide button to adjust the length of tube
13. Telescopic tube
14. Floor nozzle with button to extract or retract brushes
/
15. Button for disconnecting the hose
PRIOR TO FIRST USE
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and
all accessories from the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard)
out of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred
during transport. Place the vacuum cleaner on a sturdy, dry and flat surface.
Make sure the vacuum cleaner is unplugged before (dis)assembling any parts.
HOSE
Connecting the hose to the appliance: insert the hose end into the hose socket at the front until you hear a click.
Disconnecting the hose from the appliance:
make sure the vacuum cleaner is unplugged. Press the bu
tton [15] for disconnecting
the hose and remove the hose.
TELESCOPIC TUBE
1. Connect the handle of the hose into the telescopic tube until it clicks.
2. Set the telescopic tube to the desired length. To do this, pull the slide button upwards and pull the top part of the tube out
of the bottom part to make it longer. Release the slide button and let the tube snap into place.
3. Attach the floor nozzle by firmly sliding the tube into the nozzle.
4. Disconnect the hose from the tube press the button of the click system and pull the hose handle out of the tube.
ACCESSORY
For the benefit of the different cleaning objectives, attach the accessory to the handle of the hose by sliding it firmly on the
handle.
Combination crevice nozzle: for cleaning skirting boards, corners and small areas.
The combination crevice nozzle can be used in two ways:
a. folded in as a crevice nozzle or
b. folded out with a brush.
ASSEMBLY
b.
a.
Содержание TVC2001B
Страница 2: ...2 ...
Страница 3: ...3 1 5 2 3 7 6 4 8 10 12 13 14 4 9 11 15 ...
Страница 34: ...34 ...
Страница 35: ...35 ...