tomado TDC8001W, Инструкция по эксплуатации

Страница: 34 / 80

Start delay
Use this function to start the drying process after a certain amount of time has elapsed. When the set delay
time expires, the selected drying programme will start automatically. The time starts to countdown on the
display and the indicator blinks. To set the START DELAY proceed as follows:
1. Load your laundry and make sure the door of the appliance is closed.
2. Press the ON/OFF button, then turn the programme selector knob and select the desired programme.
3. Select the ANTI-CREASE function if needed.
4. Press the START DELAY button. Set the hours by repeatedly pressing or holding the START DELAY button.
It can be set from 0 up to 24 hours.
5. Press the START/PAUSE button to activate the programme with delayed start.
i
CAUTION!
• If you press the START/ PAUSE button again, the delay function will be paused. Press the START/ PAUSE button again
to resume the START DELAY.
Cancelling start delay
To cancel the START DELAY function, press the ON/OFF button.
Tijd Time
When one of the programmes Warm , Cold or Refresh is selected, press the time button to adjust the drying
time in 10 minute steps.
Anti-kreuk
Anti-crease
At the end of the drying cycle, the default anti-crease time is 30 minutes. When the anti-crease option is
activated, the anti-crease time at the end of the programme will be 120 minutes. Choose this option before
starting the drying process. The anti-crease light will light up. This function prevents the laundry from
creasing. During the anti-crease phase, the laundry can be removed.
The anti-crease option is not available for the programmes: Cool , Refresh and Wool .
Extra droog Extra dry
The extra dry option allows you to adjust the dryness level of the laundry. It adds more time to the
drying process.
Choose this option before starting the drying process.
The extra dry option is not available for the programmes: Cotton iron , Warm, Refresh, Wool
and
Delicate .
3 sec.
Kinderslot
Child lock
This function is a safety feature and prevents children from misusing the control panel. To activate the child
lock, proceed as follows:
• When the drying process is active, press the ANTI-CREASE button and hold for 3 seconds to activate
the child lock. The child lock indicator lights up in the display.
Deactivating the child lock
• Press the ANTI-CREASE button and hold for 3 seconds to deactivate the child lock. The child lock indicator
disappears from the display.
i
CAUTION!
When the CHILD LOCK is activated, all buttons are deactivated, except for the ON/OFF button.
3 sec.
Mijn Programma
My cycle
The My Cycle option allows you to set your favourite programme with the extra options as you desire.
To set your favourite programme, proceed as follows:
1. Select your favourite programme with the programme selector knob and any extra options you want to add.
2. Press and hold the TIME button for 3 seconds until the beep sounds. Your favourite programme has been saved.
3. Turn the programme selector knob to the MY CYCLE position and press START to start the drying process.
• If you want to change the settings of My Cycle, repeat steps 1 and 2.
Startuitstel
EN - 34