31
User Manual - TOM-Audio TG-101
31
4.6. Automatic radio channel synchronization
Once the transmitter and receiver use the same radio channel, the receiver‘s radio chan-
nel synchronizes automatically with the transmitter‘s channel.
For example: Transmitter and receiver both use channel five. The transmitter now chan-
ges to channel eight. The receiver now automatically changes it‘s channel to channel
eight as well. The radio communication is restored.
4.7. Summarizing several receivers TG-101R as a group
In order to guide several groups of people simultaneously the radio channels must be
summarized as a group. To simplify the process of summarizing the receivers into groups
follow these instructions:
1. Push the increase, decrease and On/Off button (
) simultane- ously
for approx. three seconds on the receivers you want to summarize as a group. The
radio channel will be reset to factory setting „00“.
2. Please repeat step one with the transmitter you want to use with this group of
receivers.
3. Push the transmitter‘s increase and decrease button ( / ) simultane ously
for approx. three seconds.
4. The channel lock symbol (
) disappears and the channel symbol (
) starts
flashing. This indicates the unlocking of the channel lock.
5. Use the increase and decrease buttons ( / ) to adjust the channel.
Remark: You can find suggestions about the right choice of radio channels in
chapter eight in this user manual.
6. Confirm your choice by pushing the confirmation button (
). Alternitavely
the device will save and lock the radio channel automatically after five seconds.
7. The radio channel symbol (
) will stop flashing and the key symbol (
) will
