TOLSEN TOOLS 79986, Инструкция по эксплуатации

Страница: 8 / 24

SAFETY
Set up
Grounding
8
READ THE ENTIRE IMPORTANT SAFETY INFORMATION
Section at the beginning of this manual including all text under subheadings therein before set up or use
of this product.
TO PREVENT SERIOUS INJURY AND FIRE: Operate only with proper spark arrestor installed.
Operation of this equipment may create sparks that can start fires around dry vegetation. a
spark arrestor may be required. The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.
At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuel-air ratio will
need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage
to the engine and any other devices used with this product.
1. The Generator must be properly grounded in accordance with all relevant electrical codes and
standards before operation. Have the unit grounded by a qualified electrician if you are not qualified
to do so.
2. To ground the Generator, connect a #6 AWG grounding wire (not included) from the Grounding
Terminal on the Control Panel to a grounding rod (not included). The grounding rod must be an
earth-driven copper or brass rod (electrode) which can adequately ground the Generator.
3. Refer to local regulations for ground source information.