Tolomatic User Guide:
IMA-S Integrated Motor Rod-Style Actuator - Stainless Steel
• 17 •
3:
P R O D U C T C O N F I G U R A T I O N O V E R V I E W
added to replace the hex bolt fasteners with EHEDG approved fasteners. HYG3: Uses FDA approved
rod seal cartridge in the design.
3 .2 .10 Feedback Device
The IMA-S is offered with an absolute multi turn DSL feedback device as the standard feedback
Hiperface, EnDat absolute feedback devices as well as Incremental Encoder and Resolver options are
available.
3 .2 .11 Cable and Connector
CR3, CR5, CR10: Cable is resistant to cleaning and disinfecting agents. Cables are matched for each
feedback/motor combination in 3, 5, 10 meter lengths. Connectors are available on cables for select
feedback device options.
Figure 3-7 IMA-S cable is resistant to cleaning and disinfecting agents
3 .2 .12 Servo Drive
The IMA-S Series actuator functions in the same way as a brushless servo motor. A servo drive is
used to power and control the actuator. Please consult the servo drive manufacturer when sizing and
selecting a servo drive for use with the IMA-S.
NOTE:
The IMA-S must be ordered with all desired options. Field installation of options
generally cannot be done. Call Tolomatic for complete details.
