Tolomatic Hardware & Installation Guide:
ACS Drive/Controller
• vii •
H E A L T H A N D S A F E T y R E G U L A T I O N S
Handling and Unpacking
When unpacking and handling, care should be taken not to drop the drive/controller
as this can damage the connectors and internal electronics.
Product warnings
The following precautions should be observed to prevent erratic behavior or
damage:
• Do not short circuit the motor power at the power connector. Doing so may
damage the drive power electronics. The motor/cable is part of the current
regulation circuitry. For a short occurring in a motor, the motor leads should
provide enough resistance and inductance to prevent dangerous peak currents
from occurring.
• Do not reverse bias the power unit.
• Do not apply voltages above the maximum rated voltage.
• Do not expose drive to conductive contaminants, moisture, or excessive
temperature.
• Do not dissassemble or modify the drive/controller.
CAUTION!
Proper ESD measures
should be taken to avoid
static electricity from
contacting the signal and
power lines of the drive,
motor and encoder.
