Toledo Brake Monitor, Инструкция по установке и эксплуатации

Страница: 9 / 29

Doc #0017289 Brake Monitor Operator Manual Page 6
SECTION 2
HOME SCREEN
Pressing the <HOME> key will bring up the Home Screen from any other screen. This
screen displays relevant information for the operator. Pressing the <HOME> key from
the Home Screen will display the Menu Select Screen.
2.1 POS – POSITION
This display shows the current angle of the press in degrees (0-359).
2.2 SPM – STOKES PER MINUTE
When the press is in motion, this will display the current strokes per minute.
2.3 COUNTERS
Parts Counter
This will display the number of parts produced since the last Parts Counter reset
occurred. For an explanation of how to reset the Parts Counter, refer to Section 2.5 Back
Key – Reset Counters.
Stroke Counter
This will display the number of press strokes since the last Stroke Counter reset occurred.
For an explanation of how to reset the Stroke Counter, refer to Section 2.5 Back Key –
Reset Counters.
2.4 STATUS MESSAGE
The Status Message display line will show the last Stop Time, if no faults are present. If
a fault is present it will display the fault.