14
HOW TO OPERATE
１．
Confirmation of clutch
Confirm if the clutch which connects air motor and drum
is “ON” as explained in the previous page.
２．
Release of Handle brake
Release the Handle brake before operating.
This air winch is equipped with an Automatic brake
that connects the air motor separately from the Hand brake.
So, when any material is loaded , the wire rope cannot
ｗ
ind off due to this auto brake system
even if the hand brake is released.
* The condition is that the Clutch which connects the air motor and drum is ON.
３．
Operating and Stop
Following the instructions below, the direction of the operating handle for “winding off” and
“winding roll” wire rope. Once the handle is released, the winch will stop.
TAW-500
～
2000
TAW-300B
４．
Speed control for winding roll and winding off
You can fine adjust the speed of winding the roll and winding off by operating handle.
If you move the handle in small increments, the speed will be slow, and if you move the handle
in larger increments, the speed will increase. You can adjust the speed with single step.
Wind off
Wind roll
Wind roll
Wind off
Clutch is ON
Stop
Stop
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au
