Micro Tracklight Installation Instructions
Page 5
LC-1CH-MULTI Dimming System
Dimmer Pack - Part #: LC-1CH-MULTI
Each dimmer pack receives 24 VDC from an LED Driver.
The LDR24-192 LED Driver has two independent 96 watt
outputs. Each output requires an independent dimmer pack
.
DMX Mode
- Each unit is independently addressable. Up to 36 dimmer packs may be connected in series. For
applications exceeding 36 dimmer packs, an additional feed from the DMX dimmer is required. The additional feed(s)
can be sent directly from the dimmer, or you may use DMX Splitters. Consult factory on details of DMX Splitters
.
Analog Modes
- For operation from devices using 0/1-10 VDC protocol, up to 10 dimmer packs may be connected in
series. For applications exceeding 10 dimmer packs, an additional feed from the analog dimming device is required.
Manual Mode
- You may select a light intensity the fixtures will operate at. In this case, no external dimming device
is required.
For further information, refer to the instruction manual provided with the LC-1CH-MULTI Dimmer Pack.
Dimming Micro Tracklight
0/1-10 VDC In
DMX In
LED Driver
Micro Tracklight
24 VDC Output
Yellow Wire: PWM Signal
Red Wire: +V
0/1-10 VDC to next Dimmer Pack
DMX next Dimmer Pack
100~240 VAC Input
Dimmer
Pack
24 VDC Input
Black Wire: -V
Red Wire: +V
Black Wire: -V
