Micro Tracklight Installation Instructions
Page 3
LED Driver Installation
LDR24-16 (16 Watts) / LDR24-25 (25 Watts) / LDR24-40 (40 Watts)
These Class 2 LED Drivers convert an AC input into a 24 VDC output. Refer to the manual provided with
the LED Driver for detailed installation instructions.
Part#
Input Volts
Output Volts
Output Ratings
Capacity
LDR24-96
100~240
24 VDC
1 @ 4.0 Amps
60 LED Modules
LDR24-192
Tokistar’s LDR24-192 has two independent 96 watt outputs. This unit has wiring compartments for splicing on
input and output leads, and can be connected directly to conduit. Refer to the manual provided with the LED
Driver for detailed installation instructions.
Part#
Input Volts
Output Volts
Output Ratings
Capacity
LDR24-192
100~277
24 VDC
2 @ 4.0 Amps
120 LED Modules
Part#
Input Volts
Output Volts
Output Ratings
Capacity
LDR24-16
LDR24-25
LDR24-40
100~240
100~240
100~240
24 VDC
24 VDC
24 VDC
1 @ 0.67 Amps
1 @ 1.05 Amp
1 @ 1.67 Amps
10 LED Modules
15 LED Modules
25 LED Modules
LDR24-96
This 96 Watt Class 2 LED Driver converts an AC input into a 24 VDC output. Refer to the manual provided
with the LED Driver for detailed installation instructions.
24 VDC Output
Black Wire: -V
Red Wire: +V
100~240 VAC Input
Brown Wire: AC Line
Blue Wire: AC Neutral
LDR24-16 / LDR24-25 / LDR24-40 LED Drivers
LDR24-96 LED Driver
100~240 VAC Input
Brown Wire: AC Line
Blue Wire: AC Neutral
Yellow/Green Wire: Ground
24 VDC Output
Black Wire: -V
Red Wire: +V
24 VDC Output
Black Wire: -V
Red Wire: +V
Black Wire: -V
Red Wire: +V
100~277 VAC Input
Yellow/Green Wire: Ground
Black: AC Line
White: AC Neutral
LDR24-192 LED Driver
24 VDC LED Drivers
Micro Tracklight is ETL Listed when operated from our selection of 24 VDC LED Drivers. These Class 2
power supplies range from 16 to 192 watts. The input is universal ranging from 100 to 277 VAC 50/60 Hz.
100~277 VAC Input (North America Only)
100~277 VAC Input (North America Only)
