Document Ref 903647-001 Rev 3
Page 2-3
Component Technical Manual
PAS V3 Pump for Fuel Dispensers
If a tensioning roller (optional) is used, the v-belt should run in the middle of this roller. This
has to be checked during running of the pump.
ENVIRONMENTAL CONDITIONS
Climate
Marine, tropical, industrial and polar
Ambient temperature range
-40 °C to +55 °C
Temperature of liquid
-25°C to +25°C
Relative humidity
5% to 95% non condensing
Altitude
Sea level up to 2000 m
2.2
Alignment of the Pump
When installing the PAS V3 the following measures have to be taken concerning the V-
belt.
Adjust the pulleys of the motor and pump in such a way that they are positioned in one
plane. A flat plate can be used to position the pulleys correctly. In this case the plate has
to touch the pulleys at 4 points (see picture).
Issue B
