Toho Electronics TTX-800, Руководство по эксплуатации

Страница: 26 / 28

- 26 -
6.1.10 Communication Monitor Register
・
The communication monitor register is capable of continuous reading.
・
Specify the number of registers you wish to read continuously to the “ Number of Registers ” of the read request message.
Upon such, make sure that the specified value is within the register address shown on the table below.
modbus
Name Command Remark
Absolute
(DEC) Relative
(HEX)
40001 0000 Measuring Value R Over Scale: 0x7FFF
Under Scale: 0x8000
40003 0002 Manipulated SV R
40005 0004 Manipulated Variable of Main
Control R
40007 0006 Manipulated Variable of
Subcontrol
R
40009 0008 Operation State R 0:READY
1:RUN
2:MANUAL
40011 000A DO Monitor R Returns the state of DO with the bit information.
OFF:0
ON:1
0000 0000 0000 0000
|||| |||| |||| |||+-
OUT1
※
|||| |||| |||| ||+--
OUT2
|||| |||| |||| |+---
OUT3
++++ ++++ ++++ +----
Fixed to 0
※
OUT1 Fixed to 0 if the model is AO
40013 000C AO Monitor R OUT1 DO Model…Fixed to 0.0%
OUT1 AO Model … -10.0
～
110.0%
40015 000E DI Model R Returns the state of DI
Nonactive: 0 Active: 1
40017 0010 Information R Returns the state with the bit information.
Normal State: 0 Condition has Occurred:1
0000 0000 0000 0000
|||| |||| |||| |||+-
Err0 has occurred
|||| |||| |||| ||+--
Err1 has occurred
|||| |||| |||| |+---
Err2 has occurred
|||| |||| |||| +----
Loop abnormality
has occurred
|||| |||| |||+------
Sensor abnormality
has occurred
|||| |||| ||+-------
OUT1 EV1 has occurred
|||| |||| |+--------
OUT2 EV1 has occurred
|||| |||| +---------
OUT3 EV1 has occurred
|||| |||+-----------
Interlocked
|||| ||+------------
Auto tuning
++++----------------
Fixed to 0
40019 0012 Monitoring of the Remaining
Time of the Timer R 00:00 … 0x0000 99:59…0x26E7