TOHATSU M 40D2, Руководство пользователя

Страница: 80 / 89

INSPECTION AND MAINTENANCE
80
10
ENOM00970-A
Fuel system draining
ENOW00028-A
For details on handling fuel, contact an
authorized dealer.
Fuel and fuel vapors are extremely flamma-
ble and can be explosive.
z
If fuel is spilled, wipe it up immediately.
z
Keep the fuel tank well away from sources
of ignition, e.g. sparks or open flames
z
Perform all work outdoors or in a well
ventilated place.
ENOW00097-0
Be sure to use cloth to remove fuel remain-
ing in the cowl and dispose of it in accor-
d an c e w i t h l o c a l f i r e p r e v e n t i o n an d
environment protection regulations.
1. Disconnect the fuel hose from the
outboard motor.
2. Remove the top cowl.
3. Place an approved fuel container
under the drain screw and use a fun-
nel to avoid spilling fuel.
4. Loosen the carburetor drain screw.
5. Tilt up the outboard motor until fuel
flows out of the drain tube.
6. Leave the outboard motor in this
p o sitio n until all fu e l h a s b e e n
drained.
7. When thoroughly drained, retighten
the drain screw securely.
8. Check the drained fuel for the pres-
ence of water or other contaminants.
If either is present, reassemble the
outboard motor, refill the carburetor
with fuel, and then drain the fuel
again. Repeat this procedure until no
water or other contaminants are
present in the drained fuel.
1. Carburetor drain screw
ENOM00102-0
Battery
ENOW00931-A
z
Place the battery away from any source of
fire, sparks and open flames such as
burners or welding equipment.
z
Place the battery away from fuel tank.
Accidental sparks of battery may cause
explosion of gasoline.
1. Disconnect the battery cables and be
sure to remove the negative terminal
first.
2. Wipe off any chemical deposits, dirt,
or grease.
3. Apply grease to the battery terminals.
WARNING
WARNING
WARNING
1
ENOF02370-0