background image

ENGINE OPERATION

49

7

ENOM00890-A

Tiller handle type

ENOW00865-A

Do not force to shift when the throttle grip is
not in the fully closed position, otherwise,
steering system and/or shifting mechanism
may be damaged.

ENOW00867-0

Sudden acceleration and deceleration may
cause passenger(s) to be thrown overboard
or falling down.

Forward

1. Turn the throttle grip to reduce

engine speed. 

2. When the engine reaches trolling (or

idling) speed, quickly pull the shift
lever to the Forward position.

Reverse

1. Turn the throttle grip to reduce

engine speed. 

2. When the engine reaches trolling (or

idling) speed, quickly pull the shift
lever to the Reverse position.

Acceleration

ENOW00867-0

Sudden acceleration and deceleration may
cause passenger(s) to be thrown overboard
or falling down.

Open throttle grip gradually.

1. 

Shift lever

2. 

Forward

3. 

Reverse

1. 

Throttle grip

2. 

START position

3. 

Full closed

4. 

Full opened

ENOM0900-0

Side mount RC type

ENOW00867-0

Sudden acceleration and deceleration may
cause passenger(s) to be thrown overboard
or falling down.

  

CAUTION

  

WARNING

  

WARNING

  

WARNING

ENOF01916-0

1

2

3

1

4

3

2

ENOF01908-1

Содержание M 40D2


























































































Отзывы: