Installing the Filter
If not already installed, hold the Filter by the small groove at the widest part.
Hold the Kettle so that the Spout is facing you. Slide the Filter down so that
the tab on the inside of the Filter can be snapped into position in the center
vertical cutout on the filter holder position.
DO NOT
use the Kettle without the Filter in position as water may spill out
when boiling.
DO NOT
remove the Filter when the Kettle is hot.
Descaling
Under normal use, a deposit of scale may form on the inside of the Kettle.
If descaling is required, follow the directions below:
1. Unplug Power Cord from wall outlet and allow Kettle to cool completely.
2. Remove the Filter and wash the Filter under running water. Replace.
3. Scale which has accumulated inside the Kettle can be removed by boiling
equal parts of white vinegar and water, 2 cups/500 ml of each is recom-
mended. To boil, follow the directions in the 'Instructions for Use' section.
4. Unplug the Kettle from the wall outlet and allow the mixture to stand
overnight. Empty out the mixture.
5. Fill the Kettle to the MAX level with fresh cold water.
6. Bring water to a boil and discard. For heavy scale build-up,
repeat this process.
5
Booklet TJK-312 v2.qxd 2/06/05 11:54 Page 11
