DESCRIPTION OF PARTS
1. Handle
2. Lid
3. Spout
4. Filter
5. Body
6. On/Off Switch
7. Maximum Level Marking
8. Indicator Light
9. Power Base
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Water boiled for the first time should be discarded.
INSTRUCTIONS FOR USE
1. To use the Kettle with the Filter, position the Filter before filling
the Kettle with water. To install the Filter, position the Kettle so that
the Spout is facing away from you. Grasp the filter so that the
rectangular tab is facing down. The rectangular tab should be placed
at the bottom edge of the kettle wall underneath the spout.
Push on the Hook at the top of the Filter so that the vertical tab snaps
into the top rim of the Kettle.
2. Fill kettle, with a minimum of 1" (2.5 cm) of water, through
the lid opening.
DO NOT
attempt to fill while the Kettle is on the Power Base.
DO NOT
use for other than boiling water. Other liquids will contaminate
the interior of the Kettle.
DO NOT
fill past the MAX level indicated inside of the Kettle.
Overfilling may cause water to spill out when boiling.
3
1
2
3
4
8
9
5
6
7
Instruction booklet TSK-21 3/13/02 12:16 PM Page 9