4
(6) Assembly/Disassembly of the Microphone
<Disassembly>
1. Holding the upper cover, slide the battery case and push it up as shown in the figure.
2. Remove the battery.
3. Remove two screws using a Phllips screwdriver. (The upper cover can now be removed by hand.)
4. Pull the upper cover to remove it.
5. Remove the switch knob.
6. Remove two Phillips screws to remove the upper circuit board.
7. Remove three Phillips screws to remove the lower circuit board.
<Assembly>
To re-assemble the unit, reverse the procedures above.
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
Battery Case
(5) Take off the switch knob
Battery
MIC BODY
MIC BODY
(6)
(3)
(4)
(7)
