background image

AT8688 / AT8688S

ANTI-SHOCK MICROPHONE STAND

- Heavy die-cast construction and non-slip bottom pads minimize 

coupling of surface vibration to the unit.

- Low-profile design with low-reflectance black finish for minimum 

visibility.

- The improved tighter microphone socket for reduce the swing of 

the microphone.

There are two models for application - AT8688 / AT8688S. Combin-
ing technical and artistic features in the design, the microphone 

stands find their various applications in the field of broadcast and 

communications. 

The two models come with a low reflectance, matte-black finish. 

The AT8688 features a 3-pin XLRF type receptacle on the input port 
and 3-pin XLRM type receptacle on the output port. Both recepta-

cles are gold-plated finish. The AT8688S also features a phantom-

powered mute switch with a LED indicator that meets stringent 
audio transmission requirements and adapts to various types of 
microphone.

MOUNTING / CONNECTIONS:

1. Insert a microphone into microphone stand while pressing the top 
connector.

2. Connect XLRF-3 side of the cable to the stand and the other side 
to your equipment.

3. To  remove  the  microphone,  pull  out  the  microphone  while 
pressing the release tab of the XLRF circular connector of the 
microphone stand.

Note that

 the microphone stand could break and cause an injury if 

it is dropped.

FORM No. ATGC-L0181-11-E

Machida • Tokyo • Japan

MECHANICAL SPECIFICATIONS

AT8688

AT8688S

MIC ATTACHMENT

XLRF-type,

XLRM-type

XLRF-type,

XLRM-type,

Switch with LED

DIMENSIONS

WIDTH

DEPTH

HEIGHT

91 mm

132 mm

38 mm

91 mm

132 mm

38 mm

WEIGHT

800 g

840 g

DESCRIPTION

These Audio-Technica anti-shock microphone stands effectively 

isolate mounted microphones from impact vibration and 
mechanical noise normally transmitted from the surface.

They are intended for use with microphones stood on lecterns, 
pulpits, conference tables and similar surfaces. Ideal for use 

with gooseneck microphones and other quick-mount type 

microphones using industrial standard XLRM 3-pin type 
connectors.

AT8688S OFF SWITCH

The AT8688S features a newly design press-on/press-off switch  
circuit that controls the microphone, the mute attenuation level up to 
64dB. The circuitry also operates a light in the switch, powered by 
the 24-52V phantom source, to indicate when the mic is “on”.

AT8688S ELECTRICAL SPECIFICATIONS

PHANTOM POWER REQUIREMENTS

24~52V DC, 2 mA typical

INSERTION LOSS*

1.2 dB

OFF ATTENUATION*

64 dB minimum

   *150 ohm source, 100k ohm load

AT8688S

AT8688

BACK SIDE

Отзывы: