23
7. OPERATION TEST
7.1. Operation Check by Means of the Test Switch
Using the test switch, operations of both the calling station indication output and external equipment control
output can be checked.
Step 1.
Push CN4's test key without connecting the card to the exchange, and enter test mode.
Step 2.
Turn on and off indication outputs 1-32 and control outputs 1-32 on Card No. 1 first, and then check
outputs 1-32 on Card No. 2 by turning them on and off. Similarly, repeat the same tests for up to Card
No. 32.
Step 3.
To quite the test mode, turn the power off, then turn it on again.
7.2. Check through Individual Operations
7.2.1. Checking VS-900DI/VS-910DI for proper operation without using the master station
Step 1.
Connect the VS-900DI to the exchange.
Step 2.
Dial with the direct select selection input to call the person you want to talk to.
• The LED connected to the calling station indication output lights, permitting synchronized operation
of the devices connected to the external equipment control output.
• Incoming calls can be responded to by means of the Direct Select input corresponding to the
receiving indication. As in the above case, the LED connected to the calling station indication output
also lights, permitting synchronized operation of the devices connected to the external equipment
control output.
[Conversation through the Headset]
Connect the phone jack to the VS-900DI referring to p. 15 "CN8 headset connection."
Step 3.
Connect the headset plug into the jack, and conversation can be made using the headset.
The conversation type of "Duplex", "Press-to-talk", or "Voice-operated switching" depends on other
party's type of unit and conversation mode.
Step 4.
Press [C] key to terminate conversation.
[Conversation through the Microphone and Speaker]
Do not connect the headset.
Step 3.
Conversation can be made using the microphone and speaker.
The conversation type of "Duplex", "Press-to-talk", or "Voice-operated switching" depends on other
party's type of unit and conversation mode.
Step 4.
Press [C] key to terminate conversation.
7.2.2. Checking VS-900DI/VS-910DI for proper operation when using the master station
Here check the operation when only their Direct Select functions are used in combination with the master
station (case when the master station is used for conversation).
Step 1.
Connect the master station in series with the exchange.
Step 2.
Using the Direct Select Input, dial to make a call, and converse with the connected party through the
master station or instead of doing this, dial at the master station and converse with the connected
party. The LED connected to the calling station indication output lights, permitting synchronized
operation of the devices connected to the external equipment control output. Also, incoming calls can
be responded to by means of the Direct Select input corresponding to the receiving indication. As in
the above case, the LED connected to the calling station indication output also lights, permitting
synchronized operation of the devices connected to the external equipment control output.
Step 3.
The conversation can be terminated by means of on-hook operation or the [C] key on the master
station or VS-900DI's input key or CN4's [C] key.
Tip
The call transfer function can also be used by means of the VS-900DI's transfer key (CN4's [Xfer] key).
Содержание VS-900DI
Страница 31: ......
Страница 32: ...133 06 233 1A...
