Toa VS-900DI, Инструкция по эксплуатации

Страница: 21 / 32

21
6. REGISTRATION
Use the VS-900 PC interface software to register the station No. for each key input.
6.1. Direct Select Setting
Connect the VS-900DI to the VS-900MF for setting.
Designate the exchange number, then perform the following settings:
Setting Item Contents
Control output mode
Select the external equipment control output operation mode.
Response-Activate: Make contact when conversation begins.
Call-Activated:
Make output when calls are initiated.
6.2. Direct Select Dial Setting
Connect the VS-900DI to other VS-900DI.
Designate both the exchange number and the master station address, then perform the following settings:
Setting Item
Contents
One-shot make duration Set the one-shot make duration.
Dial number
Set the number to be programmed into each key. (If the station number is
assigned to the dial number, the name programmed during exchange line
setting is displayed in the "Name" item.)
Remote door control output
number (Switch number)
Set the output number to be used in remote door control.