17
6.2. Initiating Priority Speech (TS-D1000-CU Chairman Unit Only)
Only the TS-D1000-CU Chairman unit has Priority control over speaking functions. Even when a speech is in
progress among Conference units, the Chairman unit can terminate the speech and supersede other speakers.
Chairman unit priority speech activation can differ depending on whether operation is set to PTT (see below)
or ALT (the next page). Priority speech operation can be changed by browser. For details, please refer to the
separate Instruction Manual (Browser Settings).*
Note
Chairman unit priority speech cannot be activated when the Conference mode is set to Voice activation.
(See "Conference Mode Setting" on p. 31).
6.2.1. When priority speech activation is set to PTT (factory default setting)
Step 1. Speak while holding down the Priority speech key.
Both the Speech and the microphone’s In-use indicators light,
and the microphone turns on.
A single-tone chime is sounded at all other Conference units,
indicating that the Delegate units cannot be used for speaking.
Chime ON/OFF settings can be changed via the browser
(factory default setting: ON).
For details, please refer to the separate Instruction Manual
(Browser Settings).*
Notes
• During Chairman unit priority speech, sound output from
connected wired microphones and the video conference
system are muted.
• In the case of systems configured with multiple Chairman
units, if one Chairman unit has initiated Priority speech, other
Chairman units cannot initiate Priority speech, even if their
Priority speech keys are pressed.
Tips
• Monitor speaker sound volume is attenuated when both
Speech and the microphone’s In-use indicators are lit.
• Monitor speaker volume can be muted in the browser settings.
For details, please refer to the separate Instruction Manual
(Browser Settings).
Step 2. Release the Priority speech key after speaking is completed.
Both the Speech and the microphone’s In-use indicators
extinguish, returning monitor speaker output to its original
volume.
Note
Terminated Conference units do not automatically revert to their
previous speaking modes after Priority speech is terminated.
In such cases, first press the Talk key again to cause both the
Speech and the microphone’s In-use indicators to light, then
begin speaking.
* Can be downloaded from the TOA DATA Library (https://www.toa-products.com/international/).
TS-D1000-M1
Standard microphone
or
TS-D1000-M2
Long microphone
In-use indicator
Priority speech key
Speech indicator
