Toa TS-820 Series Скачать руководство пользователя страница 38

Страница: 38 / 68

Step 1. Switch on the power to the Central unit while

holding down its Installation status confirmation

button.

The Central unit's Battery indicator lights, placing

the unit in installation confirmation mode.

(1) When a connection check signal is output from the Central unit,

the Microphone in-use indicator on the Conference unit that has

received the signal flashes.

(2) An acknowledgement signal is transmitted from each Conference

unit.

(3) A response confirmation signal is output from the Central unit that

has received the acknowledgement signal, and the Microphone

in-use indicator on the Conference unit that has received the

signal changes from flashing to steady ON.

Step 2. Press the Installation status confirmation button for

1 second or more after confirming the indication.

The Central unit's Battery indicator turns off. The

Microphone in-use indicators on the Conference

units also go out, and the installation status

confirmation mode is terminated, returning the

system to normal operation mode.

13. INSTALLATION STATUS CONFIRMATION

Installation status for the Infrared transmitter/receiver unit, and Conference units can be checked from the

Central unit. Switch on the power to the Conference units to confirm their installation status after completing

installation and connection.

Note

None of the unit's functions can be used while in installation status confirmation mode, except Priority Speech

initiated from the Chairman unit.

Flashes

Lights

Battery indicator

Lights

Turns off

Содержание TS-820 Series





































































Результаты поиска

Содержание TS-820 Series

Отзывы:

Бренды по названию

Популярные бренды

Toa TS-820 Series, Инструкция по эксплуатации

Результаты поиска

Содержание TS-820 Series

Отзывы:

Бренды по названию

Популярные бренды