20
Step 4.
Install the Pan Brackets B to the Pan Brackets A secured to the wall.
In this case, set the speaker’s horizontal angle.
Note:
Be sure to set both upper and lower Pan Brackets B at equal angles.
Pan Bracket B
Pan Bracket B
The mounting position of this bolt
determines the horizontal angle.
Pan Bracket A
(already secured to the wall)
Pan Bracket A
(already secured to the wall)
Hex bolt M8 x 25
(supplied with the SR-PB5)
Hex bolt M8 x 25
(supplied with the SR-PB5)
The mounting position of this bolt
determines the horizontal angle.
Horizontal angle adjustment
Wall
5°
Wall
10°
Pan Bracket A
Pan Bracket A
Speaker's horizontal angle can
be adjusted to 5° or 10° left or
right.
The diagrams below are viewed
from upper side.
•
•
Notes
Step 5.
Attach the supplied safety wire to the speaker.
Remove the safety wire mounting bolt on the speaker’s rear panel, then fix the safety wire to the
speaker using the removed bolt.
Note:
Attach the safety wire on the side facing the safety wire anchor bolt installed in Step 1.
Safety wire mounting bolt
Safety wire (accessory)
Speaker (rear)
