15
Step 2.
Install the supplied mounting brackets on the wall.
Secure the Mounting Bracket A to the upper anchor bolts and the Bracket B to the lower anchor bolts.
Mounting Bracket A
(accessory)
Mounting Bracket B
(accessory)
Nuts and washers
(required separately.)
M10 anchor bolt for the mounting bracket
(required separately)
M10 anchor bolt for the mounting bracket
(required separately)
M10 anchor bolt for the safety wire
(required separately)
Nuts and washers
(required separately.)
1
1
2
2
Note
Ensue that the notch points upward.
Step 3.
Attach the supplied safety wire to the speaker.
Remove the safety wire mounting bolt on the
speaker’s rear panel, then secure the safety wire
to the speaker using the removed bolt.
Note
Attach the safety wire on the side facing the
safety wire anchor bolt installed in Step 1.
Safety wire mounting bolt
Safety wire (accessory)
Speaker (rear)
Remove the hole plug on the speaker’s top, then
install the supplied eyebolt instead.
Note
As this eyebolt is for temporarily suspending the
speaker at installation, never use this eyebolt for
permanent installation of the speaker.
When using the supplied eye bolt at the speaker installation
Remove the hole plug.
Eyebolt M10 x 30
(accessory)
