26
11.2. Installing Sr-D8-M and Sr-D8-S(s) in multi-unit configuration
Up to 3 SR-D8-S speaker units can be connected in series to one SR-D8-M.
• Attach the safety wire, strong enough to withstand heavy load, to the unit.
• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be
easily accessible.
• Do not use this speaker in a flying installation.
• Only install speaker units in locations that can structurally support the weight of the speaker and its
mounting brackets (Total weight ... 2-Unit Configuration: 57 kg or 125.66 lb, 3-Unit Configuration: 88 kg or
194 lb, 4-Unit Configuration: 118 kg or 260.14 lb).
• Nuts and bolts used for wall mounting are not supplied with the unit.
Use hardware appropriate to the wall’s structure and composition.
• Never install the unit on the wall tilting over 30°.
• Never adjust the speaker angle to the left or right when the unit is installed facing up or down.
WArNINg
11.2.1. required mounting brackets
[2-Unit configuration]
Mounting Bracket
Number
Remark
SR-D8EP Extension Plate
1
SR-D8WB Wall Mounting Bracket
2
Arrange 9 sets of M10 anchor bolts and M10 nuts separately.
SR-D8CL Wall Mounting Adapter
1
SR-D8HB Hoisting Bracket
1
SR-D8FB Fixing Bar
2
Use when setting left or right angles to over 45°.
[3-Unit configuration]
Mounting Bracket
Number
Remark
SR-D8EP Extension Plate
2
SR-D8WB Wall Mounting Bracket
3
Arrange 14 sets of M10 anchor bolts and M10 nuts separately.
SR-D8CL Wall Mounting Adapter
2
SR-D8HB Hoisting Bracket
1
SR-D8FB Fixing Bar
3
Use when setting left or right angles to over 45°.
[4-Unit configuration]
Mounting Bracket
Number
Remark
SR-D8EP Extension Plate
3
SR-D8WB Wall Mounting Bracket
4
Arrange 19 sets of M10 anchor bolts and M10 nuts separately.
SR-D8CL Wall Mounting Adapter
3
SR-D8HB Hoisting Bracket
1
SR-D8FB Fixing Bar
4
Use when setting left or right angles to over 45°.
