24
11. INSTALLATION
11.1. Installing a Single Sr-D8-M Unit
• Attach the safety wire, strong enough to withstand heavy load, to the unit.
• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
• The socket-outlet shall be installed near the equipment and the plug (disconnecting device) shall be
easily accessible.
• Do not use this speaker in a flying installation.
• Only install speaker units in locations that can structurally support the weight of the speaker and its
mounting brackets (Total weight: 31 kg or 68.34 lb).
• Nuts and bolts used for wall mounting are not supplied with the unit.
Use hardware appropriate to the wall’s structure and composition.
• Never install the unit on the wall tilting over 30°.
• Never adjust the speaker angle to the left or right when the unit is installed facing up or down.
WArNINg
11.1.1. required mounting brackets
Mounting Bracket
Number
Remark
SR-D8WB Wall Mounting Bracket
2
Arrange 9 sets of M10 anchor bolts and M10 nuts separately.
SR-D8CS Wall Mounting Adapter
1
SR-D8FB Fixing Bar
2
Use when setting left or right angles to over 45°.
11.1.2. Wall mounting
Step 1. Install anchor stud
bolts in the wall (see
the figure at right).
Step 2. Assemble the bracket sets to be mounted to the wall.
Step 3. Mount the assembled bracket sets to the wall.
32
(1.26)
125
(4.92)
(4.92)
246 (9.69)
155 (6.1)
125
625 (24.61)
56 (2.2)
120.4
(4.74)
9-12×28
(9-0.47×1.1)
Note
Gray area indicates speaker
mounting position.
Unit: mm (in)
[Anchor Stud Bolt
Mounting Dimensions]
Bracket Mounting Anchor Stud Bolts (M10)
[Single nut]
[Double nut]
18 – 30
25 – 30
(0.71 – 1.18)
(0.98 – 1.18)
Wall
Wall
Unit: mm (in)
To determine stud bolt projection from the wall
surface, refer to the dimensions indicated below:
Wall
Wall bracket of
the SR-D8WB
Wall bracket of
the SR-D8WB
SR-D8CS
Hex bolt M8×25
(with spring and plain
washers, supplied
with the SR-D8CS)
Hex bolt M8×25
(with spring and plain
washers, supplied
with the SR-D8CS)
3
2
2
Nut for M10
(Prepare separately.)
Anchor Stud Bolt M10
(Prepare separately.)
