25
Step 4. Remove screws from speaker sides.
Step 5. Securely tighten 6 angle adjustment bolts (4
on the upper side and 2 on the lower side)
of each speaker bracket, then attach each
bracket to the speaker.
Step 6. Loosely tighten bolts in the mounting holes
located on both sides of the lower part of
each speaker bracket.
Step 7. Hang the loosely tightened bolts on the wall
bracket.
Step 8. Install bolts in left- and right-side mounting
holes located in the upper part of the speaker
bracket.
Step 9. Securely tighten all bolts.
[completed Mounting]
Note
Left and right angles can be adjusted within a range of 0° – 90°.
If no angle adjustments are required, this completes the installation. When
performing angle adjustments, please refer to “Angle Adjustment” on p. 31.
Unit: mm (in)
Remove screws.
The removed screws are not used.
Note
SR-D8-M
5
5
6
6
7
7
8
4
Wall
Hex bolt M6×20 (with spring
and plain washers)*
Hex bolt M10×30 (with spring
and plain washers)*
Loosely tighten
bolts.
Securely tighten.
Securely tighten.
Hang on wall bracket.
[Enlarged figure of Part A]
Speaker bracket
of the SR-D8WB
Speaker bracket
of the SR-D8WB
Wall bracket of
the SR-D8WB
Wall bracket of
the SR-D8WB
* Supplied with the SR-D8WB
Hex bolt M10×30
(with spring and
plain washers)*
A
A
[completed
Dimensional Diagram]
373 (14.69)
48 (1.89)
576.5 (22.7)
319 (12.56)
118 (4.65)
Unit: mm (in)
