background image

INSTALLATION MANUAL

SPEAKER MOUNTING BRACKET

HY-UH08

Thank you for purchasing TOA’s Speaker Mounting Bracket. 

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

日本語の設置説明書は裏側をご覧ください。

1. SAFETY PRECAUTIONS

•  Before installation or use, be sure to carefully read 

all  the  instructions  in  this  section  for  correct  and 

safe operation.

•  Be sure to follow all the precautionary instructions 

in  this  section,  which  contain  important  warnings 

and/or cautions regarding safety.

•  After  reading,  keep  this  manual  handy  for  future 

reference.

Indicates a potentially hazardous situation which, 

if  mishandled,  could  result  in  death  or  serious 

personal injury. 

WARNING

•  Install the unit only in a location that can structurally 

support  the  weight  of  the  unit  and  the  mounting 

bracket.  Doing  otherwise  may  result  in  the  unit 

falling  down  and  causing  personal  injury  and/or 

property damage.

•  Since  the  unit  is  designed  for  indoor  use,  do  not 

install it outdoors. If installed outdoors, the aging of 

parts causes the unit to fall off, resulting in personal 

injury.

•  Do not use other methods than specified to mount 

the bracket. Extreme force is applied to the unit and 

the unit could fall off, possibly resulting in personal 

injuries.

•  Owing to the unit’s size and weight, be sure that at 

least two persons are available to install the unit. 

Failure to do so could result in personal injury.

•  Use  nuts  and  bolts  that  are  appropriate  for  the 

ceiling’s or wall’s structure and composition. Failure 

to  do  so  may  cause  the  unit  to  fall,  resulting  in 

material damage and possible personal injury. 

•  Tighten  each  nut  and  bolt  securely.  Ensure  that 

the  bracket  has  no  loose  joints  after  installation 

to  prevent  accidents  that  could  result  in  personal 

injury.

•  Use the specified mounting bracket in combination. 

Doing otherwise may cause the unit or component 

to fall off, resulting in personal injury.

•  Do  not  mount  the  unit  in  locations  exposed  to 

constant  vibration.  The  mounting  bracket  can  be 

damaged by excessive vibration, potentially causing 

the unit to fall, which could result in personal injury.

Indicates a potentially hazardous situation which, 

if mishandled, could result in moderate or minor 

personal injury, and/or property damage.

CAUTION

•  Avoid touching the bracket’s sharp metal edge to 

prevent injury.

•  Do not stand or sit on, nor hang down from the unit 

as this may cause it to fall down or drop, resulting in 

personal injury and/or property damage. 

•  Have  the  unit  checked  periodically  by  the  shop 

from  where  it  was  purchased.  Failure  to  do  so 

may  result  in  corrosion  or  damage  to  the  unit 

or  its  mounting  bracket  that  could  cause  the 

unit  to  fall,  possibly  causing  personal  injury. 

133-01-00266-00

Содержание HY-UH08

Страница 1: ... Owing to the unit s size and weight be sure that at least two persons are available to install the unit Failure to do so could result in personal injury Use nuts and bolts that are appropriate for the ceiling s or wall s structure and composition Failure to do so may cause the unit to fall resulting in material damage and possible personal injury Tighten each nut and bolt securely Ensure that the...

Страница 2: ...bracket HY W0801 The SR F08 can be installed directly to the ceiling or the wall only with this bracket 3 DIMENSIONAL DIAGRAM 4 SPECIFICATIONS Unit mm 464 5 18 29 379 14 92 341 13 43 95 2 3 75 4 11 30 0 43 1 18 230 9 06 50 1 97 Top Front Right side Finish Steel plate black semi glossy paint Dimensions 464 5 w x 230 h x 95 2 d mm 18 29 x 9 06 x 3 75 Weight 2 kg 4 41 lb Note The design and specifica...

Страница 3: ...n For mounting the speaker attached with the bracket to the Bracket B use the 4 hex bolts supplied with the speaker mounting bracket to join Notes For the installation of the Bracket A read the instruction manual of the speaker mounting bracket to join Use all 4 hex head bolts and securely tighten them Step 5 Loosen the hex head bolts installed in Step 2 and adjust the vertical angle of the SR F08...

Страница 4: ... that are appropriate for the wall s structure and composition Failure to do so may cause the speaker to fall resulting in personal injury WARNING Secure the bracket with 4 bolts using all the 4 mounting holes For the mounting bracket s dimensions and the mounting hole positions see DIMENSIONAL DIAGRAM Step 3 Install the SR F08 to this bracket using the supplied hex head bolts Step 4 Loosen the bo...

Отзывы: