URL: https://www.toa.jp/
133-01-00266-00
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
6. INSTALLING THE SPEAKER DIRECTLY TO THE WALL OR CEILING
Without using the HY-C0801 or HY-W0801, you can directly install the SR-F08 to the wall or ceiling with this bracket only.
Step 1. Remove 1 each screw on the optional speaker system SR-F08's top and
bottom surfaces.
Step 2. Install this bracket to the wall or ceiling.
Bolts and nuts used to fix the Bracket A on a wall are not
included.
Prepare those that are appropriate for the wall's structure
and composition. Failure to do so may cause the speaker to
fall, resulting in personal injury.
WARNING
Secure the bracket with 4 bolts using all the 4 mounting holes.
For the mounting bracket's dimensions and the mounting hole positions,
Step 3. Install the SR-F08 to this bracket using the supplied hex head bolts.
Step 4. Loosen the bolts installed in Step 3, and adjust the vertical angle of the
SR-F08. Then, securely retighten the bolts.
SR-F08
Hex head bolt M8 x 35
(accessory,
1 each on both sides)
Wall or Ceiling
Hex head bolt M8 x 35
(accessory,
1 each on both sides)
SR-F08
Tightening torque: 8 N·m
SR-F08
Owing to the speaker’s size and weight, be sure that at least two
persons are available to install the speaker. Failure to do so could result
in personal injury.
WARNING
Wall or Ceiling
