11
[Rear]
4. DC Power Input Terminal
Connect this terminal to 24 V DC power supply.
Power is supplied from the
.
(M3 screw terminal; barrier distance: 6.4 mm)
5. ALL CALL Terminal
Connect this terminal to the FV-200RF-AS.
6. RF-PP LINK Terminal
Connect this terminal to the FV-200RF-AS.
(0 dBV, 600 , balanced, 3P terminal block for
audio)
7. RF Input Volume
Adjust the input volume from FV-200RF-AS.
Turning the control clockwise increases the
volume, while turning it counter clockwise
decreases the volume.
8. Paging Input Terminal
Connect audio and control signals from
equipment ( such as telephone paging
equipment) to this terminal. Input signals to this
terminal are broadcast when the control
terminals are closed.
Audio: –60 dB / –20 dB selectable, 600 ,
balanced
Control: Open voltage: 24 V DC; short-circuit
current: under 2 mA
3P terminal block for audio and 2P terminal
block for control
9. Paging Input Sensitivity Selector Switch
Sets the input sensitivity of Paging Input (8) to
–60 dB or –20 dB.
(Default: – 20 dB)
11. Timer Input Terminal
Connect audio and control signals from timer-
operated equipment to this terminal. Input signals
to this terminal are broadcast with the highest
priority when the control terminals are closed.
Audio: -20 dB, 600 , unbalanced
Control: Open voltage: 24 V DC; short-circuit
current: under 2 mA
2P terminal block for audio
and 2P terminal block for control
12. Timer Input Volume
Adjust the input volume of Timer Input(11). Turning
the control clockwise increases the volume, while
turning it counterclockwise decreases the volume.
13. EV Input Terminal
14. EV Input Volume
control clockwise increases the volume, while
turning it counterclockwise decreases the volume.
4
24V, 110mA
5
6
7
8
9
10
11
12
13
14
29
GROUND
FV-200PP-AS
PRE-AMPLIFIER MIXER PANEL
TOA Corporation ,
JAPAN
MADE IN INDONESIA
15
16
17
18
19
20
21
23
24
25
26
27
28
22
10. Paging Input Volume
Adjust the input volume of Paging Input(8).
Turning the control clockwise increases the
volume, while turning it counter clockwise
decreases the volume.
15. BGM Output Terminal
Signals from the MIC/LINE Inputs 1~4 and AUX1,2
are mixed and output. Connect this terminal to
the power amplifier for BGM broadcast.
(0 dB, 600
Ω
, balanced, 3P terminal block)
16. Output Mode Selector Switch
Sets the audio output to “CH1” (1-channel) or
“CH2” (2-channel) broadcasts.
(Default: 1-channel broadcast)
Adjust the input volume of EV Input(13).
Turning the
Used to connect the FV-200EV-AS. This input can be
used only while an emergency broadcast is being
made.
-20 dBV, 600
Ω
, unbalanced, 2P terminal block for
audio and 2P terminal block for control.
FV-200PS-AS
