Toa EXES-2000, Функции и инструкции по эксплуатации

Страница: 32 / 35

24) General purpose control
At the time of system installation, No.24 programming must have
been set up to allow this function. (It is impossible to use both PA
paging and general purpose control in the same system.) Also,
specific station have to be registered for door remote/general
purpose control.
External equipment can be controlled with 3 relays.
1. Dialing
2. Dialing
3. Dialing
4. Dialing
5. Dialing
6. Dialing
makers a relay (A) contact continuously.
breaks a relay (A) contact
makers a relay (B) contact continuously.
breaks a relay (B) contact
makers a relay (C) contact continuously.
breaks a relay (C) contact
Note.
1) This function may be operated even when all the speech
links are occupied.
2) It is also possible to operate Door Remote Control from the
station registered to operate General Purpose Control.
25) Speech message
No.24 programming has to be set up for registering this
function.
With the speech message function in use, the message can be
recorded for 32 seconds. There are a file for recording the
called party's message ("response" message) distributed to the
caller automatically, and another file used by the caller for
recording his message after listening to the response message.
The called party records his response message using the
speech message function and sets the Privacy switch to ON
before being away from his assigned station. This permits the
recorded message to be automatically given to the party who
made a call. The caller, if necessary, records his own message,
which the called party can hear by shifting the Privacy switch
back to OFF after coming back to his station.
1. Recording the response message.
By dialing from the station registered for this function
the response message can be recorded for a certain period of
time. Depress
to monitor the recorded message.
Placing the Privacy switch in the ON position automatically
sends the message to the calling party.
Note.
Recording of the response message is finished when a brief
single tone is heard. Depressing or
replacing a
handset before the brief tone sounds will erase all the
previous messages.
<Recording>
Speech message file
<Playback>
Speech message file
Speech message file
– 29 –