Toa EXES-2000, Функции и инструкции по эксплуатации

Страница: 29 / 35

19) Pocket pagers
It is possible to call a pager receiver from the station.
(1) If the receiver number and station number are identical.
When there is no response from the called party, dial (confirma-
tion tone) and the called party's receiver may be called.
Note.
1) This dial operation may be used only when the station
number was first called.
2) It is impossible to call the pager when the call is made
during conference, mic off or call transfer operation.
(2) If the receiver number and station number are not identical.
To call, depress
(confirmation tone)
(00-99: receiver number)
This dial operation is employed to call the receivers No.0 to
No.19 or No.52 to No.99 or when the receiver number is not
equal to the station number. Note that this dial operation is
impossible from the station in use for conversation.
The station which called the receiver waits for the response
being disconnected from the speech path after the confirmation
tone is heard. It can receive a call from the other station while
waiting.
Dialing
(called party's receiver number 00 through 99)
from any master station enables the called party to respond to the call.
Note.
1) Since there are 4 pager calling lines, 4 receivers can be
called at the same time. The called person is to answer
within 1 minute after the call has been received, or the call is
disconnected from the pager calling line.
2) When there is no idle pager calling line or the called receiver
is busy, a busy tone sounds 3 times in the caller's station
and the call is terminated.
Pager transmitter
Pager call
Response call
Pager receiving call
Response
(From the nearest station)
– 26 –