Toa CP-64 Скачать руководство пользователя страница 6

Страница: 6 / 65

WIRING FOR TIE-LINE CONNECTION OF THE EXCHANGES

Each exchange can be connected by means of a cable with a diameter of 0.65mm (25.6 mils.) for a distance of up to

2km (5600 ft).

Regarding the tieline links which are not used, turn off the DIP switch of each unused tieline link inside the Tie-line

Unit TI-62.
Connect "T" line (2 wires) of the 4 wires of each link to "R" line (2 wires) of the other exchange.

The 2 wires of the "T" line and "R" line have no polarity.

If the BX-620 is used, its terminals No.1 and 2 are for the "R" line and No.3 and 4 are for the "T" line.

1. Wiring for tie-line connection of 2 exchanges

Note 1. Any combination of tie-line links between exchanges "A" and

is possible.

Note 2. Mount only one Tie-line Interface unit when the number of tie-line links is within 8.

2. Wiring for tie-line connection of 3 exchanges

Note 1. Judging from the front of the exchange, TI-62 (TI1) (connector J11) is the left-hand unit and

TI-62 (TI2) (connector J12) is the right-hand unit.

Note 2. Be sure to connect connector TI1(J11) to TI2(J12) between the exchanges. Connection of TI1

(J11) to TI1(J11) or TI2(J12) to TI2(J12) will lead to failure of proper operation of the system.

Exchange "A"

BX-620

Exchange "B"

Tie-line Interface Unit TI-62

BX-620

YR-801

Tie-line Interface Unit

TI-62

Tie-line Interface Unit TI-62

YR-801

BX-620

YR-801

Tie-lino Interface Unit TI-62

— 5 —

Содержание CP-64


































































Результаты поиска

Содержание CP-64

Отзывы:

Похожие инструкции для CP-64

Бренды по названию

Популярные бренды

Toa CP-64, Руководство по установке

Результаты поиска

Содержание CP-64

Отзывы:

Похожие инструкции для CP-64

Бренды по названию

Популярные бренды