This "Installation Handbook of CP-64" deals principally with (2)
Selection of functions and setting up of respective equipment.
This Handbook also explains the connection method for the EXES-
6000 Tie-line System using the CP-64 and the TI-62 units.
There are certain minimum installation requirements to be met even
tions or equipments, it is not necessary to read instructions on
unrequired functions. Make sure, however, that careful study of the
necessary parts of this booklet should be done before proceeding
further .
INSTALLATION HAND BOOK OF EXES-6000
EXES-6000
EX-610/620/630
INSTALLATION
HAND BOOK
OF EXCHANGE
133-21-117-1
EXES-6000
CP-64
INSTALLATION
HAND BOOK
133-21-119-3
(This Hand Book)
DATA TRANSMITTING AND RECEIVING UNIT
"DT-E11 OPERATION MANUAL" 133-05-094-1A
"DR-B61 OPERATION MANUAL" 133-05-095-0
EXES-6000
CP-64
INITIAL
CHECKING
SHEET FOR
THE SYSTEM
133-21-121-8
INTRODUCTION TO THE INSTALLATION MANUAL FOR EXES-6000
This manual forms part of the Installation Manual for TOA INTER-
COM SYSTEM EXES-6000.
You may add the CP-64 to your TOA INTERCOM SYSTEM EXES-
6000, according to your specific needs, to obtain various other
functions. Correct operation of these additional functions is
Provision of such additional function requires the following:
(1) Connection of the additional equipment, as required.
(2) Selection of functions which satisfy your needs and setting up
these functions in the respective equipment.
For (1) Connections of Equipment, etc., refer to "
Installation
Handbook of Model EX-610/620/630 EXCHANGE" or "
Opera-
tion Manual of Data Transmitting and Receiving Units", etc.
— 2 —
through you may not need many additional functions or additonal
when you may use only some or the additional func-