EN
Active Noise Cancelling On
Hold the ANC button for 1 second. Green LED light will turn on. The ANC function is
available at both Wired and Wireless condition.
Active Noise Cancelling Off
Hold the ANC button for 1 second. Green LED light will turn off. The ANC function
must be switched off by manual operation.
Bluetooth Switch On
To switch on, press and hold the multi-functions button about 3 seconds. The
headset enters Bluetooth searching mode. Blue light on.
Bluetooth Switch Off:
To switch off, press and hold the multi-functions button about 3 seconds.
Pairing
1. Ensure that your phone or Bluetooth device is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the
headset. The headset enters the pairing mode, and the blue indicator light starts
to flash quickly. To pair the headset if it has been previously paired with another
device, ensure that the previously paired devise is switched off.
3. Activate the Bluetooth feature on your phone or Bluetooth devices, and set it to
search for Bluetooth devices.
4. Select “TNB CSTRAVELBK” from the list of found devices on your phone or
Bluetooth devices.
5. When successfully connected, the blue light turns to continuously lighting.
The headset that has been previously paired with another device will automatically
connect with the device if the device is power on and within connecting range, if not,
the headset will enter standby mode with continuously blue light.
CSTRAVALBK_notice_EXE.indd 4
16/06/2017 12:02
