•
A value of 1 signifies the minimum amount of applied
rudder. When the rudder setting is too low, vessel track will
be a slow “ S ” ie: understeer through too little rudder
applied.
•
A value of 10 signifies the maximum amount of applied
rudder. When the rudder setting is too high, vessel track will
be a rapid “ S ” ie: oversteer through too much rudder
applied.
Backlighting
Pressing the MODE button four times will display the message “LitE”
Pressing either the
<
or
>
buttons will turn the backlighting on and off.
The backlighting will always be off when the unit is powered up.
Rudder Angle Indicator
Pressing the MODE button three times will display the rudder position in
numeric value Port or Starboard
•
When the rudder is at centre it will display “ 00”
•
As port rudder angle is applied, the number will be “Pt**”.
•
As starboard rudder angle is applied, the numbers will be “St**”.
Pressing MODE or AUTO will cancel the rudder display.
TMQ AP46 Autopilot
Page 16 of 34
Ver1.0 07/03/2007
