Press [MENU] to change parameters of the
room panel
. List of groups of parameters will appear on the screen. Turn the knob
right (clockwise) to select group "
G
-
Room panel
", and then to select press the knob or the [SELECT] button. "
G
1"- the first in
the group of parameters of the
room panel
will appear on the screen. Turn the knob right to go to the following parameters,
and then press [EDIT/SELECT] or the knob to change. At this point, you can change the value of a parameter either by turning
the knob or using the dynamically appearing buttons. Some parameters need to be selected for editing; use the [SELECT]
button and the knob
.
Editing is confirmed by pressing the knob or the [SAVE] button.
Pressing [EXIT] will bring back the previous screen without saving any changes.
(moving between parameters and changing of settings - turn the
knob)
:
G
1a day (1
0,0
-
35,0
°C, default:
21,0
°C)
G
1b night (1
0,0
-
35,0
°C, default:
18,0
°C)
G
1c economy
(1
0,0
-
35,0
°C, default:
17,0
°C)
Operation with
If "NO" has been selected, oker controller operation with
is deactivated.
LIST OF
ROOM PANEL
PARAMETERS
G1 Room temperatures
G2 Precision of room temperature control - hysteresis (0,1-0,5°C, default setting: 0,2°C)
G3 Pairing of the room control panel with the Joker controller (press [START] to begin pairing) and
selection of radio communication channel
G4
room control panel
J
the room panel
Room panel
the room
icon and reading of
temperature disappear from the main screen.
ROOM CONTROL PANEL
PARAMETER MENU - group
G
Current room temperature measured by the room control panel is displayed in the top left corner of the main screen of
the JOKER controller (see drawing below). Four symbols can appear together with temperature:
-
room temperature setting not reached;
-
room temperature setting reached;
-
no room panel/failure of the room panel/communication failure in the room panel - the main controller works like
a version without remote control;
-
communication failure in the Joker controller - the main controller works like a version without remote control.
Press
MENU
pressing the knob or
the [SELECT] button
Turn the knob
to select
Room panel
13
current
room
temp.
