TMI Products BELAIR-SC8, Руководство пользователя

Страница: 2 / 22

CAUTION
Make sure the power cord is plugged into an electrical outlet with the appropriate voltage. (As shown on the
extractor). Each power cord must be on separate circuits. To test if the extractor is on two separate circuits press the
“Circuit Test” switch located on the switch plate. If the green light is illuminated it will confirm that the extractor is on
two separate circuits. If the green light is not illuminated this indicates that the extractor is on the same circuit, and
that the user must find an additional circuit to plug the other power cord.
Warning!
This extractor is designed for use on carpet, floor and upholstery applications as per instructions written in this manual.
Any deviation from its proper use or purpose and the consequential damage that may occur is the sole responsibility of
the end user.
Do not attempt to repair the extractor. See your authorized service dealer.
Do not expose extractor to extreme temperatures.
Do not use unauthorized replacement parts.
This extractor was tested before shipping and antifreeze may remain in the plumbing system. The user must flush out
the antifreeze before use. Make sure to use antifreeze if storing the extractor in extremely cold weather.
2
Dual Power Cord Extractors
Single Power Cord Extractors
GENERAL PRECAUTIONS FOR SINGLE AND DUAL POWER CORD EXTRACTORS:
Make sure the extractor is plugged into an electrical outlet with the same voltage as shown on the extractors