TMI Products BELAIR-SC8, Руководство пользователя

Страница: 16 / 22

HOW TO BLEED SOLUTION LINES
WITHOUT ELECTRIC INSTANT WATER HEATER:
1. Fill solution tank with clean water.
2. Connect desired tool to the extractor with a vacuum hose and solution hose.
3. Turn pump switch “ON”.
4. Open trigger valve from the attachment tool (see Image 16.1), and spray until all air is out from the solution
system. (see Image 16.2) It might take 2-4 minutes depending on the jet size of the attachment tool.
16
WITH ELECTRIC INSTANT WATER HEATER:
WARNING: DO NOT TURN THE HEATER ON until you have followed these steps.
1. Fill solution tank with clean water.
2. Connect desired tool and extractor with a vacuum hose and solution hose.
3. Turn pump switch “ON”.
4. Open the trigger valve on the attachment tool (see Image 16.1), and spray until all air is out from the solution
system. (see Image 16.2) It might take 2-4 minutes depending on the jet size of the attachment tool.
5. Turn heater switch on and wait approximately 3-4 minutes to heat up. Now the unit is ready to use with the
heater.
Press the lever to open the valve
TMI
MADE IN U.S.A.
Once the line is clear
of air you will start to
see water comming out
Image 16.1
Image 16.2
(extractor with optional attachment tool )