W W W . T M G I N D U S T R I A L . C O M P 1 6 / 2 0 To l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Install the front door pressing plate. Trim the side door tarp.(refer to
figure13)
-
(6) Pressing plate (#22A)
-
(1) Pressing plate (#22B)
-
(52) Tapping screw (#39)
Figure 13
Step 8 : Install mechanical roll up door
Front door installation - when you look at figure 14, please look at the
door from inside.
Components include: one hand winch (#23) and steel cables (#23A). The
hand winch comes with a shorter cable, we call it cable (#B).
Mount the hand winch on the lower beam (#13).
Slide the bottom dropping tube (#15,#16) into the bottom horizontal fabric
pocket on door cover (#35). Then slide the other six upper dropping tubes
(#15, #16) into other horizontal pockets.
From the bottom door rails (#10L,#10R), slowly put the first dropping tube
(#15, #16) into the rail, then put the others (#15, #16) into the door rails.