W W W . T M G I N D U S T R I A L . C O M P 1 8 / 2 0 To l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Figure 14
Step 9 : Install rear cover panel
The door cover must be zipped. Use rope (#32) to lift up the rear
cover (#34A)
from the center grommet and tie it firmly to the truss tube and spread toward
both sides through each grommet along the tube. (refer to figure 15)
Figure 15
Step 10 : Install roof cover (#33)
NOTE : The cover must be installed on a windless day. DO NOT attempt to
install the cover during windy conditions.
As shown on figure 16, when you are ready to install the roof cover, unpack
the cover and position it parallel to the building frame on one side.
The cover must be pulled over the top of the truss frame without being
snagged or stressed on any frame members.
Use multiple ropes over the top of the frame as shown in figure16.Having a
couple of people inside of the structure with a ladder to assist to push
upwards would help the cover to be pulled over smoothly without any
damage.