Content
Introduction ............................................................................................. 2
Installation ............................................................................................... 4
Operation ................................................................................................ 8
Troubleshooting ....................................................................................... 11
Warranty .................................................................................................. 12
Appendix ................................................................................................. 13
Introduction
Thank you for purchasing the TMG A-15, one of the most innovative and
sophisticated devices in its category today.
Please be sure to read this manual to familiarize yourself with the features and
operation of this product. Enjoy the trip and drive safely.
TMG system is a class 1M laser product. Never look at the heads
closely while powered on! We recommend wearing Laser protected
eye wear, when testing the jamming function with Laser guns.
Motorists are expected to exercise all caution while using this
product, and to obey all applicable traffic laws.
Check your State and local laws on usage. We encourage you to disable your
jamming function as soon as possible once you slow down. This can be done by the
RCV button, front power button, or the RCV tab on the app. Running in the “test
mode” is meant for laser jamming testing only, and is in full time jamming mode,
and could result in suspicion that a LIDAR operator has been jammed. Auto-sleep
mode is default, and highly recommended with an Auto-kill feature to “Receive only
mode” after 4 seconds. Jamming function can be disabled by adjustable Auto-kill
function through the App.
CPU only takes 12V power sources; A 24V power source will
damage the product permanently, and will void your 2 year
warranty.
Specifications
Input ............................................................................... DC 12V
Laser Wavelength ........................................................... 905nm
Optical Peak Power .......................................................... Up to 75 W
Communication .............................................................. BT3.0/4.0 Compatible
Operation Temperature .................................................. -10°F~150°F / -25°C~70°C
FCC ID ............................................................................. 2ARGWTMGA15
Fuse size ......................................................................... 2A 250V Glass
0.2 x 0.78 inch /
5 x 20 mm (2amp) (F2A)
Tool Requirements
• T-10 torque bit or allen wrench
• Cordless screw driver- mount the brackets
• Small screws- to mount the brackets
• Velcro or 3m tape to mount the CPU
• Tape measure- measure out the head separation
• Electrical tape - wrap up the head connectors and the wire to feed through
the firewall.
• Metal wire to feed the
wires through the
firewall. (Optional)
2
3
Indent
Set Screw
Detent
Coupler
Detent on transponder lines up with indent on the bracket.
Position is locked into place with the set screw.
