System
Time
Network
Digital Frame
Language
English
Device-ID
1
Menu style
Win10
Keytone
on
Factory settings
ok
software upgrade
Restart the system
ok
Formatting SD
ok
SD remaining space
18.6G/128G
Software version
V1.01-20201216
ok
2. Restore factory settings: All parameters are restored to factory mode. Note that
TuyaSmart's device must be deleted together before it can be used again, otherwise it
cannot be added and used by other accounts.
1. Please format the SD card with the device and copy the files to the corresponding
folder.
1: (Screen off): Monitor will be off with no operation within 10s
2: (Clock): Time will be displayed on the screen at standby mode
System
Time
Digital Frame
1: The picture file must be copied to the Digital Frame folder, the picture resolution
must not be greater than: 2526x1576, the format is JPEG.
2: Long press the file to pop up the submenu, select "Delete" or "Delete All", and click
the file to enter the playback interface.
Setting
Door1/Ring1
Scheduie
06:00-12:00
Time
30S
Ring mode
Standard
Ring select
Ring volume
8
Out door volume
5
1
Door1/Ring2
Door1/Ring3
Door2/Ring1
Door2/Ring2
Door2/Ring3
Door1
Camera1
Enable switch
on
Unlock delay
1
Signal type
Record mode
AHD1080
Message
Video
Motion detection
Motion
detection
duration
off
Motion dispiay
20s
Motion ringtone
off
Motion
Detection
Push
APP
off
off
Door2
Camera2
Signal mode
PAL
off
Door1
1: If the channel is closed, it will be skipped when monitoring the polling screen. This
channel and APP will not display this channel. Please set it carefully.
2: When Motion Detection Push APP is closed, the phone will not receive any push
information.
Devices
Ring
3.The Device ID is an important configuration of the equipment in the system.
It must be configured correctly,Otherwise it will not work properly. If the current device
is connected to the Outdoor unit1, Device ID must be set to 1, and the others Slave monitors
must be set 2/3/4/5/6, then work normally.
1: The ringtone of each channel can be set to three time periods, and different ringtone
types and volume can be set, but it should, be noted that there can be no gaps and
overlaps between the three time periods, otherwise the system will play the default
parameters.
2: Please note that the volume setting of the Door bell cannot be greater than the
volume of the indoor monitor.
GB -15
GB - 4
GB -16
