10
OPERATION
1. Once the Next Wave 60 is full of water and ensuring that the protein skimmer chamber, filtration cham-
ber and the pump and heater chamber are also full of water, plug in and switch on the water circulation
pump (4) and the heater (7).
2. Once the water circulation pump (4) is switched on, water will be drawn into the protein skimmer and
filtration chambers via the water inlets (A & B) and will pass through the filter sponges (3) and will return
back into the tank via the water outlet (C) and the directional nozzle (6) Jet Flo or Rota Flo.
CAUTION:
To avoid any operating problems, ensure the water inlets and outlets are not obscured by tank
decor, substrate or filter media.
3. Make sure all connections are tightly secured and check for leaks.
4. Ensure the skimmer collection cup and lid (2a)
are securely and correctly positioned. Failure to do so
could result in leaks.
5. Plug in and switch on the air pump (8 - not supplied).
6. Carefully turn the
air inlet adjustment valve (2b) on the protein skimmer in an anti-clockwise direction
until the micro-bubbles can be seen to just enter the base of the collection cup cone (2a).
NOTE:
When any adjustments are made to the air inlet adjustment valve (2b)
it will take a few moments
for the micro-bubbles and water level within the skimmer to settle and become stable.
7. Leave the air pump (8) running to allow the skimmer to establish itself and if required make further
adjustments to the air inlet adjustment valve (2b)
to control the air and water level within the main
skimmer body (2).
NOTE:
With any adjustments made, ensure that the water level in the main skimmer body (2) is closely
monitored to ensure the collection cup (2a) is not flooded.
CAUTION:
Failure to do so could result in water overflowing onto the floor.
NOTE:
It is perfectly normally for the protein skimmer to take a few days to become established and
stable.
NOTE:
Under normal operating circumstances, due to the size of the Next Wave 60, there will generally
be very little organic matter or detritus to be removed by the skimmer and filtration system. Therefore
the skimmer may not always be producing a foam and skimming. This is perfectly normal. As long as the
micro-bubbles and water level within the skimmer are correct, the skimmer will start skimming as soon
as organic matter or detritus build up in the Next Wave 60.
NOTE:
Variables such as introducing new micro corals or micro invertebrates into the tank, frequent
feeding, adding supplements or medications, fluctuations in water quality, water changes and mainte-
nance may temporarily alter the performance of the protein skimmer.
8. Plug in and switch on the Reef Ion 30 lighting system.
CAUTION:
Due to the size of this tank, the Next Wave 60 is NOT suitable for keeping all species of
ornamental aquarium fish
(see “Suitable Species for the Next Wave 60” on pages
43-46)
. If you plan
to introduce livestock to this Next Wave 60 such as small fish, micro invertebrates or micro corals, please
ensure you thoroughly research the habitat requirements of the livestock, i.e. the required temperature
and water parameters, before introducing them into this tank. If in any doubt check with your local
aquatic retailer.
We also
highly recommend
that you purchase a good marine keeping reference book to gain further
knowledge on how to keep your marine livestock in optimum condition and to ensure an enjoyable and
successful marine-keeping experience.
Содержание Next Wave Tank 60
Страница 1: ...1 Next Wave Tank 60 Instructions 2 8 Installations 2 13 Instructies 2 18 ...
Страница 2: ...2 60kg ...
Страница 6: ...6 1 3 6 7 4 5 2 ...
Страница 7: ...7 10 13 14 11 12 8 9 ...
