TMC MI5VP4, Руководство пользователя

Страница: 52 / 85

Chapter 6 BIOS Configuration
48 MI5VP4 User’s Manual
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU’s internal clock.
If the Max. Power Saving is not enabled, this will be preset to NO.
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank Default setting, blank the screen and turn off
vertical and horizontal scanning.
DPMS Allows the BIOS to control the video
display card if it supports the DPMS feature.
Blank Screen This option only writes blanks to the video
buffer.
Video Off After
This field specifies the mode after which the Video Off feature is
enabled. The options are
Doze, Standby, Suspend , and N/A.
Modem Use IRQ
This field specifies IRQ used by the Modem. The default setting is IRQ3.
Doze Mode
When enabled, and after the set time of system inactivity, the CPU clock
will run at a slower speed while all other devices operate at full speed.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Soft-Off by PWRBTN
This field defines the power-off mode when using an ATX power supply.
The
Instant Off mode allows powering off immediately upon pressing the
power button. In the Delay 4 Sec mode, the system powers off when the
power button is pressed for more than four seconds or enters the suspend
mode when pressed for less than 4 seconds. The default value is
Instant
Off .