TMC LI7WM, Руководство пользователя, Страница: 46 / 97

Chapter 6 BIOS and System Setup
46 LI7WM User’s Manual
6.6 Integrated Peripherals
This section sets configurations for your hard disk and other integrated
peripherals.
CMOS Setup Utility – Copyright © 1984-1999 Award Software
Advanced Chipset Features
On-Chip Primary PCI IDE
Enabled ITEM HELP
On-Chip Secondary PCI IDE
Enabled Menu Level
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
IDE Secondary Master UDMA
Auto
IDE Secondary Slave UDMA
Auto
USB Controller
Enabled
USB Keyboard Support
Disabled
Init Display First PCI Slot
AC97 Audio Enabled
AC97 Modem Disabled
IDE Block Mode Enabled
POWER ON Function Button Only
KB Power ON Password Enter
Hot Key Power ON Ctrl-F1
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
RxD, TxD Active Hi, Lo
IR Transmission Delay Enabled
UR2 Duplex Mode Half (Full)
Use IR Pins IR, Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
EPP Mode Select EPP1.7
ECP Mode Use DMA 3
PWRON After PWR -Fail Off
Game Port Address 201
Midi Port Address 330
Midi Port IRQ 10
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled to activate the channels.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster.
Rather than have the BIOS issue a series of commands that transfer to
or from the disk drive, PIO (Programmed
Input/Output) allows the
BIOS to communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode.